聚氨酯丙烯酸双组份自干漆
- Courier
- In detail
(View map)
- Lacquer baseAcrylic
- Degree of brillianceGlossy
该漆系由进口聚丙稀酸树脂、进口有机溶剂、进口助剂、因化剂配置成。本品附着力好,光亮,色彩鲜艳,用于摩托车,轿车表面作装饰保护作用。
A.Composition, Properties & Usage:
This varnish is concted with polyarcylic resin, imported organic solvent, impirted catalyst and coagulant, which is applicable for saloon car's surface finish with effects of good adsorptive affinity, brightness and gay color.
二、技术指标:
B.Technical Indices:
检验项目
Testing Ltems |
指示
Indices |
1.粘度
Viscosity |
25℃不小于70-110秒
Not less than 70-110 seconds at 25℃ |
2.细度
Fineness |
不大于 20
Not larger than 20 |
3.干燥时间
Drying time |
不大于表干1h实干16h-18h
Not larger than surface dry 1 hour complete dry 16-18hrs |
4.光泽%
Lustre% |
不小于95
Not less than 95 |
5.硬度
Hardness |
不小于 0.5
Not less than 0.5 |
6. 柔韧性
Flexiblity |
不小于 2
Not less than2 |
7.冲击强度
Impact stress |
50 |
8.附着力
Adsorptive affinity |
不大于2
Not larger than 2 |
三、施工参考
1、使用前必须将漆搅拌均匀,用160目-200目丝网过滤,以1∶6配制固化剂比油漆。
2、喷漆后应在室温15分钟以上,使其漆膜自然流平后50-60℃烘烤。
C.Application Remarks:
1、Stir evenly and thoroughly. Filtrate with screen of mesh number 160-200. Coagulant-Varnish ratio 1:6.
2、Leave the painted surface under room temperature for ating film folws flat naturally.